The Extreme Gardener

Experiments in permaculture and
other gardening adventures in northeastern Vermont

Posts tagged ‘tools’

This year’s pruning tool investment

Tuesday, March 31st, 2009

quinte apple

One of my gardening resolutions for this year was to get more of our approximately 20 fruit trees into better trim. Our trees range from several venerable specimens with girth I can’t reach around to a few 6 year olds, and everything in between, mostly apples grafted onto wild stock over 20 years ago. I’ve not been as good about pruning as I should have been, and now am suffering the consequences. There is a lot of out-of-reach vertical growth, several inches thick in some cases. What pruning I had been doing was with a good pair of professional quality bypass loppers, a folding pruning saw, hand pruning shears, and occasionally a regular bow saw. The bow saw we had mostly wouldn’t fit to make the needed cuts.

I had envisioned getting either some kind of pole pruners or a hand held chain saw (a cutting chain with rope on either end), essentially something that would permit me to make cuts from the ground. I do my homework now when purchasing tools, because I have learned the hard way that cheap tools are usually more expensive in the long run, and I get very aggravated by tools that don’t perform well, or only last a season or two.

I contacted a professional tree pruner, Padma at Earthwise Harmonies, and queried him about his favorite tools:

For pruning fruit trees: I generally don’t favor the heavier long pole pruning tools with exterior string mechanism which I find gets caught in the trees, yet their advantage is that they, like loppers, can cut up to 3 inch wood. Mostly I’ve come to depend upon ARS long arm (lighter=aluminum-stainless steel) pruners. For yearly maintenance work, I use the 4 feet and 7 feet with heavy duty razor edges, saws can be attached. (ARS makes an 8 feet one but I’m told it can’t be mailed.) I supplement with a telescopic (unfortunately not heavy duty) 6′ extends to 12′, but although it is a good tool, it depends on mechanisms that will eventually fail (I’ve replaced several). So the telescopic should be secondary, for places hard to reach; and if you planted and upkeep your trees yourself, you probably didn’t let them get so far out of reach to need a telescopic. The long arm ARS pruners can be got from: Pruning Tools and Harvest Equipment for Professional Fruit Industry: web: www.sfequip.com or also at www.wood-avenue.com

For slightly thicker sprouts or two year twigs I use a 10 feet long pole lever pruner made in Vermont by the Allen Bros Inc: 6023 US Route 5 Westminster, VT www. allenpolepruner.com . I’ve had one for almost 20 years but it eventually broke, I replaced it and also bought a shorter one, which I hardly ever use. They cut through a hook that also is handy for helping to pull down rotten branches.

As far as hand clippers, I go to places like Big Lots because what matters to me is that they be light weight since repetitive motion takes a toll on my hands, and I end up losing many, surprisingly some of these cheaper lighter plastic clippers are not junky.

For a chainsaw, I mostly use the smallest lightest ECHO, unless I need to make bigger cuts; I love it because at times I literally swing off a branch with one hand while using the chainsaw with the other. I found the telescopic chainsaws too heavy and inconvenient for precise side cuts. So instead I use the lightest 24 feet aluminum ladder (I prune a lot of older tall trees). I have a motorized extended 8 feet ECHO articulated hedge trimmer, the head of which I can interchange into a 6 or 7 inch jig type saws with a pruning blade with which I find I can manage to cut difficult to reach branches up to 5 or 6 inches in diameter.

orchard saw

The Allen pole pruner sounded like what I wanted, and I really liked that it is Vermont made. I phoned to get more info, and got to speak with Tim Allen, who was very helpful. From our conversation and Padma’s suggestions I realized that for the bulk of the pruning I need to do this year (high vertical shoots 3″ and thicker), what I really needed was a good ladder and an agressive hand saw. Tim suggested an orchard band saw that they carry. We just got a suitable ladder last summer, so we purchased the saw (see the photo) and have been really pleased . We decided to wait on the pole pruner until next year – it’s not cheap, but once I get the bulk of the big bad stuff cut out, the pole pruners should be good for annual maintenance.